Elo TouchSystems IntelliTouch Ultra, Руководство по эксплуатации продукта, Страница: 93 / 105

82 82
Appendix Appendix C - Specif C - Specifications ications
Physical Characteristics Physical Characteristics
Construction Construction
Four-layer surface-mount design with internal ground plane for EMI suppression. Four-layer surface-mount design with internal ground plane for EMI suppression.
Dimensions Dimensions
See Figure B-1, page 67. Total height including shield less than 0.75-inch. See Figure B-1, page 67. Total height including shield less than 0.75-inch.
Mounting Hole Dimensions Mounting Hole Dimensions
See Figure B-1, page 67. Two mounting holes are plated through-holes (PTH) for See Figure B-1, page 67. Two mounting holes are plated through-holes (PTH) for
chassis ground connection.
chassis ground connection.
Connectors and Pin Definitions Connectors and Pin Definitions
The connector configuration permits the controller to be placed in-line between The connector configuration permits the controller to be placed in-line between
the touchscreen and serial I/O attachments. the touchscreen and serial I/O attachments.
Serial Input/Output Connector Serial Input/Output Connector
2x5, 0.025-inch (0.635 mm) post latching header on 0.100-inch (2.54 mm) 2x5, 0.025-inch (0.635 mm) post latching header on 0.100-inch (2.54 mm)
centers. Acceptable mating insulation displacement connectors (IDC): Berg
centers. Acceptable mating insulation displacement connectors (IDC): Berg
series 71600, 71602, 66900, 66902, Molex series 40312, Amp series 746285
series 71600, 71602, 66900, 66902, Molex series 40312, Amp series 746285
and 746288. When the mating IDC receptacle is cabled to an IDC DB9 connector,
and 746288. When the mating IDC receptacle is cabled to an IDC DB9 connector,
the interface assumes a DCE configuration.
the interface assumes a DCE configuration.
Touchscreen Connector Touchscreen Connector
2x6, 0.025-inch (0.635 mm) square post friction lock header on 2x6, 0.025-inch (0.635 mm) square post friction lock header on
0.100-inch (2.54 mm) centers. Mates with Berg Mini-Latch receptacle on the 0.100-inch (2.54 mm) centers. Mates with Berg Mini-Latch receptacle on the
IntelliTouch touchscreen cable. The withdrawal force exceeds 3.9 lb.
IntelliTouch touchscreen cable. The withdrawal force exceeds 3.9 lb.
Power Connector Power Connector
2x5 0.025-inch (0.635 mm) square post friction lock header on 2x5 0.025-inch (0.635 mm) square post friction lock header on
0.100-inch (2.54 mm) centers. Acceptable mating receptacle connectors: Molex
0.100-inch (2.54 mm) centers. Acceptable mating receptacle connectors: Molex
series 70450, Amp AMPMODU Mod. IV product line, or Berg mini-latch housing
series 70450, Amp AMPMODU Mod. IV product line, or Berg mini-latch housing
with Mini-PV pins.
with Mini-PV pins.