User Manual: i-Series Interactive Signage
SW602242 Rev B, Page 10 of 31
Chapter 5: Operation
Power
To turn the system on, press the power button once. If a power cable is plugged in to the
i-Series system, then the i-Series system will turn on automatically.
A Power Status LED is provided on the OSD Remote that functions according to the following
table:
i-Series System Status
Color
LED status
OFF
Orange
OFF
IDLE
White
BLINKING
ON
White
ON
The system consumes low power when in IDLE and OFF modes. For detailed power
consumption specifications, refer to technical specifications available on the Elo website
www.elotouch.com.
Touching the screen will bring the system out of MONITOR IDLE mode.
If long periods of disuse are planned, unplug the AC power cable to save power.
The maximum voltage, frequency and current for the system are provided in the power ratings
table below:
Model
Operating Voltage
Range
Operating Frequency
Range
Operating Current
Range
ESY10i1
100 - 240Vac
50/60 Hz
0.62A
ESY15i1
100 - 240Vac
50/60 Hz
0.72A
ESY22i1
100 - 240Vac
50/60 Hz
1.19A
Operating System
Android version 4.4 will be pre-loaded on the system.
Projective Capacitance Touchscreens Technology
Four (4) simultaneous touches can be reported at one time.
Gesturing Images:
For multi-touch monitors, the following gestures are possible:
