background image

 

User Manual: i-Series Interactive Signage 

SW602242 Rev B, Page 25 of 31 

 

Care and Handling 

 

The following tips will help maintain optimal performance of the i-Series system: 

   Disconnect the AC power cable before cleaning. 

   To clean the display, use a cloth lightly dampened with a mild detergent. 

   It is important that your unit remains dry. Do not get liquid on or inside the unit. In the event 

that liquid does get inside, have a qualified service technician inspect the unit before you 
power it on again. 

   Do not wipe the screen with a cloth or sponge that could scratch the surface.   

   When cleaning the touchscreen, use window or glass cleaner applied to a clean cloth or 

sponge. Never apply the cleaner directly on the touchscreen. Do not use alcohol (methyl, ethyl 
or isopropyl), thinner, benzene, or other abrasive cleaners. 

 

 

Waste Electrical & Electronic Equipment Directive (WEEE) 

 

 

 
This product should not be disposed of with household waste. It should be deposited at a 
facility that enables recovery and recycling. 
 
Elo has put in place recycling arrangements in certain parts of the world. For information on 
how you can access these arrangements, please visit 
http://www.elotouch.com/AboutElo/ewaste-program/. 

 

 
 
 
 
 
 
 
 

Содержание ESY10i1
































Отзывы: