User Manual ET1302L
12
Section 4: Operation
Power
To turn the touch monitor on or off, press the touch monitor
’s power button once.
The Power Status LED on the bottom of the touch monitor functions as follows:
Touch Monitor Status
LED Status
OFF
OFF
SLEEP
PULSING (Green)
ON
ON ( Green)
The system consumes low power when in SLEEP or OFF modes. For detailed power-consumption specifications, refer to the technical specifications on
the Elo website http://www.elotouch.com
Touching the screen will bring the attached host PC out of SLEEP mode (similar to moving the mouse or pressing a keyboard key).
To improve reliability and reduce wasteful power consumption, disconnect the AC power cable from the monitor when long periods of disuse are planned.
Please purchase the approved power source that is certified by an IEC or UL through the specified dealer
.
Touch
No calibration is required for projected capacitive touch technology. Your touch monitor can support up to 10 touches at once.
