Elo TouchSystems E222, Руководство пользователя

Страница: 4 / 17

ELO E222ZKE001
4
Adapter can operate with half/full duplex with maximal bitrate 230kbps.
The Ethernet layer can communicate with 10 and 100Mbps.
It should be considered, that data stream can be packetized and possible
delayed because of the nature of the Ethernet and its anticollision
mechanism.
3.0 Installation
This chapter describes the adapter E222 installation process. The
process is divided to two sub-processes - software and hardware
installation.
3.1 Ethernet connection
Adapter meets IEEE 802.3 specification and is to be plugged in to the
network with straight UTP cable. When connecting two devices together,
the cross-over cable should be used instead.
For the first time, the adapter is configured to acquire IP address from
DHCP server, so in the network must be such a service to dedicate IP
address (e.g. AP – access point, router...). It can be later changed to the
fixed IP address.