Elo TouchSystems E222, Руководство пользователя, Страница: 11 / 17

ELO E222ZKE001
11
9. “ Remote management ” enables the remote configuring the adapter
with Connectware Manager
10. In a “ Users ” section can be be managed user approved to login
and configure the adapter and assigned different rights for every
user.
11. A “ Management ” section shows active configuration and allows
some changes to that. It depends on chosen profile.
12. “ Administration ” section allows to customize web interface,
update firmware, backup profile settings, factory reset, settings
overview and remote reboot.
The configuring should be finished by clicking “ logout ”.
3.9 Serial Port profiles
As mentioned in chapter 1.1, the adapter can operate in different modes.
In the configuration window of the web interface, section “Configuration \
Serial ports” can be chosen the proper mode by clicking the “
port n ” link.
The “Serial Port Configuration“ window appears. Click the “ Change
Profile... ” link, and choose the right profile. Additional info can be found
under the link “ More... ”:
1. RealPort – maps serial port over the Ethernet (COM port
redirection).
2. Console management – allows to access a device's console port
(such as routers, switches.) over a network connection.
3. TCP Sockets - the TCP Sockets Profile allows a serial device to
communicate over a TCP network
4. UDP Sockets - the UDP Sockets Profile allows a serial device to
communicate using UDP
5. Serial Bridge - the Serial Bridge Profile configures one side of a
serial bridge. A bridge connects two serial devices over the
network as if they were connected with a serial cable – so called
Serial tunneling. As it is commonly used configuration,
installation procedure follows:
a) Under the Configuration heading, select Serial Ports , then
select the port to be configured.
b) Select Change Profile....