Elo Touch Solutions ET3243L, Руководство пользователя

Страница: 25 / 27

User Manual
–
32/4243L Series IDS 25
2) If this equipment appears to cause interference with radio or television reception, or any other device:
a) Verify as an emission source by turning the equipment off and on. If you determine that this equipment is causing the interference, try
to correct the interference by using one or more of the following measures:
i. Move the digital device away from the affected receiver.
ii. Reposition (turn) the digital device with respect to the affected receiver.
iii. Reorient the affected receiver
’
s antenna.
iv. Plug the digital device into a different AC outlet so the digital device and the receiver are on different branch circuits.
v. Disconnect and remove any I/O cables that the digital device does not use. (Unterminated I/O cables are a potential source of high RF emission levels.)
vi. Plug the digital device into only a grounded outlet receptacle. Do not use AC adapter plugs. (Removing or cutting the line cord ground may in crease RF
emission levels and may also present a lethal shock hazard to the user.)
If you need additional help, consult your dealer, manufacturer, or an experienced radio or television technician.
III. Agency Certifications
The following certifications and marks have been issued or declared for this monitor:

Argentina
S-Mark

Australia RCM

Canada CUL, IC

China CCC

Europe CE

Japan VCCI

Korea KCC, e-Standby

Mexico CoC

Russia EAC

Taiwan BSMI

United States FCC, UL