Elo Touch Solutions ET3243L, Руководство пользователя

Страница: 14 / 27

User Manual
–
32/4243L Series IDS 14
Section 4: Operation
Power
To turn the touch display on or off, press the touch display power button on the OSD controller once.
The Power Status LED on the OSD controller functions according to the following table:
Touch Display /Computer Module Status LED Status
OFF OFF
SLEEP PULSING
ON ON
Touching the screen will bring the attached host PC out of SLEEP mode (similar to moving the mouse or pressing a keyboard key).
To improve reliability and reduce wasteful power consumption, disconnect the AC power cable from the monitor when long periods of disuse are
planned.
Touch
Your touch display is factory-calibrated and does not require manual calibration (unless the input video is not fully scaled
to the native resolution, or the touch experience needs to be calibrated to a specific user).
IntelliTouch Plus Touchscreen Technology
When connected to Windows 7 or 8 computers, the touch display can report two simultaneous touches. Refer to Section 2, Section “Installing the
Touch Technology Software Drivers” to find instructions to download the latest touch drivers.
The IntelliTouch Plus touchscreen can be re-calibrated to your displayed video image, if needed, through the calibration function in the Elo driver
control panel. The driver can be downloaded from the Elo Touch website.
The IntelliTouch Plus touchscreen can be re-calibrated to your displayed video image, if needed, through the Calibration function in the Elo driver
control panel.
The IntelliTouch Plus driver will only support multiple monitor if they are all using the IntelliTouch Plus touch technology.