User Manual: Elo
®
Paypoint
SW602189 Rev A, Page 3 of 24
Read this first
Before using the Elo PayPoint Register, read the important safety and handling information (this
section), Safety & Maintenance (Chapter 5), Regulatory Information (Chapter 6), and the
Warranty Information (Chapter 7) chapters in this user manual.
This section provides guidance on the safe handling and use of your PayPoint Register. Please
read to understand all of the details.
Important safety and handling information
To avoid personal injury, property damage, or accidental damage to your Elo PayPoint Register
(hereafter referred to as the register), please read through all of the information provided in this
section before using the register.
For detailed operating instructions, refer to the Elo PayPoint User Manual (this publication).
Handle the register with care:
Do not drop, bend, or puncture, the register, as this may damage the register. The register
screen is made of glass, and may break if the register is dropped, subjected to high impact, or
crushed by a heavy object. In the event that the glass chips or cracks, do not touch the broken
glass or attempt to remove it from the register display head. Stop using the register immediately
and contact Elo technical support for repair, replacement, and/or disposal information.
Do not disassemble or modify the register:
The register is a not user-serviceable, meaning it is not designed for disassembly (except
pulling out the cash drawer from the register or replacing the printer paper) or internal hardware
modification by end users. All internal repairs must be done by an Elo-authorized repair facility
or an Elo-authorized technician. Attempting to disassemble or modify your register will void any
warranty.
Prevent the register and power cord from getting wet:
• Keep register and power cord away from liquids.
• Do not immerse your register in water or leave it in a location where it can get saturated with
water or other liquids.
Use only approved power cords:
Use only the power cord supplied by Elo Touch Solutions for the register.
Unplug the register if any of the following occurs:
The register or power cord has been exposed to rain, liquid, or excessive moisture.
