ELNA eXperience 550, Инструкция по эксплуатации

Страница: 53 / 64

51
Fagoting
q
Stitch pattern: 32
w
Thread tension dial: 3 to 6
e
Presser foot: Satin stitch foot F
* The stitch patterns 30 and 38 can also be used.
Use these stitches to join two pieces of fabric to create
an open work appearance and add design interest.
Fold under each fabric edge 1.5 cm (5/8˝) and press.
Pin the two edges to paper or tear backing 0.3–0.4 cm
(1/8˝) apart.
Sew slowly, guiding the fabric so the needle catches the
folded edge on each side.
After sewing is finished, tear away the paper.
q
0.3–0.4 cm (1/8˝)
w
Paper
4
q
w
e
q
w
Select the stitch pattern 35 for French knots.
Tighten the thread tension to 5-8 when sewing.
w e q
French Knots
q
Stitch pattern: 35
w
Thread tension dial: 5 to 8
e
Presser foot: Satin stitch foot F
Scallop Stitch
q
Stitch pattern: 27
w
Thread tension dial: 3 to 6
e
Presser foot: Zigzag foot A
* The stitch pattern 42 can also be used.
4
q w
e
Sew the stitches approximately 1 cm (3/8˝) inside the
fabric edge.
Trim the outside of the stitches as shown. Make sure not
to cut the thread.