ELMOT 026 PLUS+, Руководство пользователя

Страница: 13 / 39

13
USE
ATTENTION! Do not use the appliance if the blade of head 2 (fig. A ) is
damaged or if the blade block is not working correctly.
Do not use the appliance on wet hair.
Elmot 026 Professional Clippers are ideal for trimming hair and beard.
TURNING THE APPLIANCE ON AND OFF
Turning on
• Press button
14
(fig.
A1
); LED
14.1
(fig.
A1
) lights up and the display comes on.
Turning off
• Press button
14
(fig.
A1
); LED
14.1
(fig.
A1
) and display go off.
The LCD display takes approximately 3 seconds to turn off completely.
TURBO FUNCTION TURNING ON AND OFF
Turning on
• Press button
13
(fig.
A1
); the wording “TURBO” will light up on the display (ref.
20
, fig.
A1
).
Turning off
•
Press button
13
(fig.
A1
); the wording “TURBO” will disappear from the display
(ref.
20
, fig.
A1
).
ATTENTION! With the ''TURBO'' function inserted, autonomy of the
battery decreases.
USEFUL TIPS FOR CUTTING
•
Wash the hair as usual, dry and brush it in the direction of growth to untangle
any knots.
•
After drying, do not use hairspray, foam or gel.
•
Start at the highest setting of the supplied guide comb (12 mm) and gradually
reduce the setting of the hair length using the other guide combs supplied (9-
6-3 mm).
•
For best results, use the appliance against the direction of hair growth.
•
If hair starts to clog the guide comb, remove the guide comb from the appliance
(see par. "Removing the guide comb") and clean away the hair (blow and/or brush
out).
•
To have a clean, precise cut of thick or long hair (one pass), press button
13
(fig.
A1
) to activate the “TURBO” function.
USING THE APPLIANCE
Use of the cutting guide combs.
To insert the guide comb (fig.
A2
) follow the instructions below:
•
Make sure the appliance is off.
•
Slide the guide comb onto the head until you hear it click into place (Fig.
C
).
•
Ensure that the guide comb is correctly inserted in the slots on either side.
•
Turn on the appliance as indicated in par. "TURNING THE APPLIANCE ON AND OFF."
•
Cut the hair; for tips see par. "USEFUL TIPS FOR CUTTING".
Turn off the appliance before changing or inserting any accessories.
Removing the guide comb
• Turn off the appliance.
• Push the guide comb so that it slides off the appliance (Fig.
C1
).
Using without the guide comb.
When using the appliance without the guide comb, the blade of the
head (2) will cut the hair very close to the skin.
The appliance can be used without the guide comb to cut hair very close to the skin
or to redefine the hairline of the neck and around the ears.
If the appliance has been used with the guide comb and is then to be used without it,
remove the comb as described in par. "Removing the adjustable guide comb."