- 74 -
Name
Function
Factory settings
ID
The following three items can be set according to the
root
user settings:
(Admini-
Administrator
: The administrator authority. The login
strator)
ID is “root” that is unchangeable. With this login ID, you
can view images, operate the Camera, and make
settings.
Operator
: You can view images and operate the
Camera.
User
: You can only view images.
* Only “root” can be registered for Administrator, and
up to 99 names can be registered for Operator and
User combined.
* You can use up to 16 one-byte characters for a name,
including alphanumerical characters and upper-case
and lower-case alphabetic characters.
Password
Set a password for the ID.
root
* You can use up to 16 one-byte characters for a
password, including alphanumerical characters and
upper-case and lower-case alphabetic characters.
●
Camera ID, password
Name
Function
Factory settings
INDOOR This function is selected to shoot indoors.
The color temperature is assumed to be 3200K.
OUTDOOR This function is selected to shoot outdoors.
The color temperature is assumed to be 6300K.
FL-
This function is selected when the Camera is used
LIGHT under the fluorescent illumination. The color temperature
is assumed to be 4200K.
MWB To change the color tendency as desired.
TRIGGER When [AWC] is selected and [TRIGGER] is set to “ON”, OFF
the white balance is adjusted according to the current
shooting status, by selecting the [OK] button.
MWB-R
To set the red color tendency [-30
〜
+30] when [MWB] ±0
is selected.
MWB-B
To set the blue color tendency [-30
〜
+30] when
±0
[MWB] is selected.
