- 59 -
• Passive Mode ........................ Designate whether to use passive mode or active mode for
transferring the FTP. Use passive mode when there are
restrictions on the ports because of a firewall, etc.
• Time Store Dwell Time ....... Set the interval at which images will be saved when Time
Store is valid (30 to 180 seconds).
• Time Store Resolution .......... Designate the size of images to be saved.
Half-D1: 704
×
240
SIF: 352
×
240
QQVGA: 160
×
120
• Time Store filename ............. Designate a file name for the file to be saved. A file name
consists of the “entered file name” and “time”. The
extension “jpg” will be added automatically to each file
name. If a file with the same name already exists in the
directory for saving, the data of the older file will be
overwritten. Designate a different file name (with up to 32
characters).
Note
: Two-byte characters, including Japanese characters, are not
available for a file name to be saved. Use one-byte alphanumerical
characters.
Note
: If any of such characters as “¥”, “/”, “.” is used for the file name, the
Camera may not operate normally depending on the environment of
the destination FTP server.
• Time Store Enable ............... Set whether to regularly save images in the FTP server.
• Login each send .................... Set whether to connect to the FTP server each time images
are transmitted or not (always connected).
