Network Motion Controller Installation Guide
MAN-G-LION 100 PrelIG (Ver. 1.004)
|Powering Up|
www.elmomc.com
27
Table of Contents
7.3
Powering Up
After the Gold Lion 100 has been mounted, check that the cables are intact. The Gold Lion 100 is
then ready to be powered up.
7.4
Initializing the System
After the Gold Lion 100 has been connected and mounted, the system must be set up and
initialized. The minimum system requirements for a setup are:
•
Gold Lion 100 (and power supply)
•
PC with the required Elmo software
•
At least one servo drive and motor
•
EtherCAT cables or a terminated CAN network
•
A servo drive connected through an EtherCAT cable or a CAN cable (the terminated CAN
network)
Users of SimplIQ servo drives:
Setting up the drives and motors is described in the Installation Guide for each servo drive and in
the Elmo Application Studio User Guide. Advanced features are described in the SimplIQ Software
Manual, Interlude API User Guide, SimplIQ Command Reference and CAN Implementation Guide.
Users of Gold Line servo drives:
Setting up the drives and motors is described in the Gold Line Servo Drive Installation Guide and
Elmo Application Studio Users Guide. Advanced features are described in the Gold Line Software
Manual, Gold Line Command Reference and CAN Implementation Guide.
