TECHNICAL MANUAL -
1OASBOX
8. FUNCTIONS SETUP
To setup module functions, use the dipswitch indicated in “OVERVIEW AND WIRING DIAGRAM” on
page 4.
Functions are listed in the following table:
Note: when 1OASBOX module relay output is set to control optical-acoustic devices over supervised control
lines, the module will be detected as a
bell control module
and the related output can be silenced from the con-
trol panel.
9. DISPOSAL INSTRUCTIONS
Dispose of analogue addressable module 1OASBOX in compliance with current city regulations and by lea-
ving the device in a dumping ground that is authorized for the disposal of electronic products.
If required, please contact the appropriate city office for additional information.
The materials used for this product are very harmful and polluting if dispersed in the environment.
Dip Switch
Position
Function
1
ON
Not used.
2
ON
Not used.
3
ON
Relay output contacts are free from potential
(set dip switch 5 and 6 to OFF)
OFF
Relay output is set to control optical-acoustic devices over supervised
control line
(set dip switch 5 and 6 to ON)
4
ON
Not used.
5
ON
Set it to ON (also dipswitch 6) when dipswitch 3 is set to OFF
OFF
Set it to OFF (also dipswitch 6) when dipswitch 3 is set to ON
6
ON
Set it to ON (also dipswitch 5) when dipswitch 3 is set to OFF
OFF
Set it to OFF (also dipswitch 5) when dipswitch 3 is set to ON