TECHNICAL MANUAL -
1OASBOX
1. GENERAL
1OASBOX
module has been designed for advanced fire detection systems managed by FX/50, FX/20 and FX/
10 control panels (and other compatible) equipped with loop operating with
AS protocol
; it is equipped with 1 relay
output.
The module can be connected to control a magnetic door retainer, an optical-acoustic fire alarm device, a lumi-
nous panel, and to trigger several devices (Sprinkler, explosive charges in skylight automatic opening systems, de-
vices to cut power supply or gas supply, etc.). Relay contacts current carrying capacity is 2A@DC30V. The relay
output can be programmed to control an optical-acoustic alarm device with supervised line.
The relay activated status is indicated by a two-colour LED: steady red light indicates that the output is active,
blinking green light indicates that the communication between the output and the panel is correct, blinking red light
indicates that no 24V power is supplied (when the supervised output is selected).
1OASBOX
module communicates with the fire panel over serial loop and in case of correct communication, the
two-colour LED will blink green. The loop is connected to the
AS protocol
via SIG and -S terminals. This connection
does not require an external power supply unit.
1OASBOX
module is supplied with a reduced-dimension plastic housing and is also suitable to be installed on
503-type flush-mount boxes.
2. TECHNICAL SPECIFICATIONS
Model:
1OASBOX
Protection class:
IP4X
Power supply:
DC24V
Operating voltage:
DC20,5 to 27,5V
Power consumption:
3,3 mA idle mode, 4,5 mA max alarm mode.
Connections:
terminals for inputs, relay outputs, signals communications and
serial loop connection.
LED indicators:
(on board) two-colour LED indicator for relay output active and communication
status.
Controls:
rotary dip switches to set ID address.
6-pin dip switch to set operating functions.
Relay contacts
carrying capacity:
0,5A@AC125V - 2A@DC30V.
Operating temperature:
-10 to +50°C; 93% r.h.
Weight:
58 g.
Dimensions:
W 91,6 x H 54,7 x D 20 mm.
Distance
between centers:
W 84 mm.
Parts supplied:
technical manual, balancing resistor (1 x 5K6Ohm).
3. PRODUCT COMPLIANCE
1OASBOX module is compliant with EMC 89/336/EEC directive: tests have been carried out according to
EN50130-4 +A1 + A2 on immunity and EN 61000-6-3 on electromagnetic compatibility.
As to electric safety, 1OASBOX module is compliant with LVD 73/23/EEC directive on low voltage safety:
tests have been carried out according to EN 60950-1 standard.
1OASBOX module is also compliant with EN54-18 standard.
CPD certification n° 0051 - CPD - 0276.