18
27
Replace Oven Bake Burner Cover
1.
Align notches on the oven bake burner cover with shoulder
screws in the bottom of the oven.
2.
Lower cover, and slide to left or right to slide shoulder screws
into the narrow ends of the notches, then lock into place.
Convert Oven Broil Burner (30" [76.2 cm] and 36"
[91.4 cm] models and the right oven cavity on 48"
[121.9 cm] models)
1.
Using a 1/4" (6.4 mm) nut driver, remove broil burner screw.
Set aside with side igniter positioned on the right.
2.
Pull the broil burner toward you until it slides out of the hole in
the oven back, and pull the electrode out of the bracket. The
broil burner will hang down in the back of the oven while you
change the orifice.
3.
Apply masking tape to the end of a 7 mm nut driver to help hold
the gas orifice spud in the nut driver while changing
it. Insert
nut driver into the gas opening, and press down onto
the gas
orifice spud, then remove by turning the orifice spud
counterclockwise and lifting out. Set
natural
gas
orifice spud
aside.
4.
Natural gas orifice spuds are stamped with a letter and a
number. Install the Number 148 oven broil burner orifice spud.
5.
Place Propane gas orifice in plastic parts bag for future use,
and keep with package containing literature.
6.
Replace the broil burner in the hole in the oven back with the
broil burner assembly inside the broil burner electrode hole as
illustrated.
7.
Reinstall the oven broil burner screw. See Step 1 for
illustration. The screw is aligned with the hole when
a click sounds.
B
A
B
A
A. Cover notches (4)
B. Shoulder screws (4)
A
A. Bake burner cover
B
A
C
A. Broil burner screw
B. Broil burner
C. Broil burner orifice hole
A
B
A. Grasp electrode here.
B. Bracket
Broil burner hanging
in back of oven
A
B
C
A. Oven back
B. Broil burner orifice
C. Broil burner orifice hole
A
B
C
A. Broil burner orifice hole
B. Broil burner electrode
C. Broil burner electrode hole
BROIL BURNER CONVERSION
TO PROPANE
26
6.
Pull electrode out of bracket.
7.
Apply masking tape to the end of a 1/4" (6.4 mm) nut driver to
help hold the gas orifice spud in the nut driver while changing
it. Insert nut driver into the gas opening, and press down onto
the gas orifice spud, then remove by turning the propane gas
orifice spud counterclockwise and lifting out. Set propane gas
orifice spud aside.
88..
Propane
gas orifice spuds are
marked with
a
number. Install
the oven bake burner orifice
spud.
99..
Place Propane gas orifice in plastic parts bag for future use,
and keep with package containing literature.
10.
Push down on the clip on the electrode bracket.
11.
Replace oven bake burner electrode inside bracket.
12.
Reinstall the oven bake burner and oven bake burner screws.
See Step 4 for illustration.
13.
Replace oven baffle and oven baffle nuts. The front holes will
be aligned, and a click will sound when baffle is seated.
A
B
A. Grasp electrode here.
B. Bracket
A
A. Propane gas orifice spud
A
B
A. Oven bake burner electrode bracket
B. Electrode bracket clip
A
B
A. Oven bake burner electrode
B. Oven bake burner electrode bracket
26
6.
Pull electrode out of bracket.
7.
Apply masking tape to the end of a 1/4" (6.4 mm) nut driver to
help hold the gas orifice spud in the nut driver while changing
it. Insert nut driver into the gas opening, and press down onto
the gas orifice spud, then remove by turning the propane gas
orifice spud counterclockwise and lifting out. Set propane gas
orifice spud aside.
88..
Propane
gas orifice spuds are
marked with
a
number. Install
the oven bake burner orifice
spud.
99..
Place Propane gas orifice in plastic parts bag for future use,
and keep with package containing literature.
10.
Push down on the clip on the electrode bracket.
11.
Replace oven bake burner electrode inside bracket.
12.
Reinstall the oven bake burner and oven bake burner screws.
See Step 4 for illustration.
13.
Replace oven baffle and oven baffle nuts. The front holes will
be aligned, and a click will sound when baffle is seated.
A
B
A. Grasp electrode here.
B. Bracket
A
A. Propane gas orifice spud
A
B
A. Oven bake burner electrode bracket
B. Electrode bracket clip
A
B
A. Oven bake burner electrode
B. Oven bake burner electrode bracket
26
6.
Pull electrode out of bracket.
7.
Apply masking tape to the end of a 1/4" (6.4 mm) nut driver to
help hold the gas orifice spud in the nut driver while changing
it. Insert nut driver into the gas opening, and press down onto
the gas orifice spud, then remove by turning the propane gas
orifice spud counterclockwise and lifting out. Set propane gas
orifice spud aside.
88..
Propane
gas orifice spuds are
marked with
a
number. Install
the oven bake burner orifice
spud.
99..
Place Propane gas orifice in plastic parts bag for future use,
and keep with package containing literature.
10.
Push down on the clip on the electrode bracket.
11.
Replace oven bake burner electrode inside bracket.
12.
Reinstall the oven bake burner and oven bake burner screws.
See Step 4 for illustration.
13.
Replace oven baffle and oven baffle nuts. The front holes will
be aligned, and a click will sound when baffle is seated.
A
B
A. Grasp electrode here.
B. Bracket
A
A. Propane gas orifice spud
A
B
A. Oven bake burner electrode bracket
B. Electrode bracket clip
A
B
A. Oven bake burner electrode
B. Oven bake burner electrode bracket
Using a Philips driver, remove broil burner screw.
Set aside with side igniter positioned on the right.
