
1
Select the network adapter connected to
the pabx.
2
Current IP address of the network adapter
(client).
3
Current IP address of the pabx as gateway,
DHCP server and DNS server.
·
The values shown in the screen shot are set as defaults for the initial settings of the PABX system. Depen-
ding on how many clients (PCs) are connected, the IP address lies within a range from 192. 168. 1. 50 to 192.
168. 1. 69. When these values are displayed, the network adapter and the Windows network settings have
been configured correctly.
·
The value for the physical address is different for each network adapter. The values for the lease depend on
when the PC is switched on.
If other data are shown, this may be due to the following reasons:
·
Changes have already been made to the initial setting for the PABX system in the Professional Configura-
tor.
·
The Windows network configuration for the client (PCs) does not correspond to the factory settings De-
fault setting.
·
Current IP address of the pabx as gateway, DHCP server and DNS server. Check your installation as descri-
bed in the operator’s manual for the PABX system (Installation and Commissioning section).
·
The TCP/IP protocol is not installed on the PC, or it has no link to the network adapter connected to the
PABX system.
Checking the TCP/IP Configuration
18
Содержание T444
Страница 1: ......
Страница 4: ...Realplayer Filter 28 Mediaplayer Filter 28 Filter update 28 2...
Страница 25: ...Configuring Internet access on a PC Checking the TCP IP Configuration 21...
Страница 35: ...31...