elmeg T444, Руководство пользователя, Страница: 12 / 36

LAN-TAPI
The package includes a program called »TAPI for LANs« for use in your network. This software can be installed on
any PC in the network. This gives you the possibility of running your TAPI application from a central location via an
interface, i. e. the PABX system. There is no ISDN card required for the PCs. Please note that software used for the
TAPI application may require certain license agreements with the software manufacturer. The program »TAPI in
LAN« does not require a license to run.
Blocking of Internet access by the provider
After several failed attempts of inputting user names or passwords the provider will block access to the Internet for a
defined period. To prevent this the router only allows three attempts to be made. After that you must then reconfigu-
re the router and enter a correct user name and password. The router must then be enabled again after this via the
Control Center.
Connection test
You can test the connection to your provider without a connection actually being set up. The item »Connection test
T-Online for DSL and ISDN« is given in the provider list in the configuration. Select this item as the first provider and
store it in the PABX system. You can then manually set up a connection to the Internet via the ControlCenter and the
results for this connection are then displayed after a few seconds. No actual Internet connection is established here
however. If the results are positive delete the current provider and enter the settings supplied by your provider in the
configuration for setting up Internet connections.
Router control via system phone
Starting with Version 4 you can configure a function key on system telephones CS290 / CS410 /CS400xt for control-
ling the router.
LED Settings
Through PABX system configuration you can de-activate the LEDs, except for the »On« LED. When you re-activate
the LEDs the »ISDN« LED may indicate a false status. You should therefore disconnect the external ISDN port for a
brief period from the NT.
Status display CAPI / TAPI in the ControlCenter
Information used for monitoring the CAPI-TAPI functions can be displayed using the Control Center menu. Indica-
tion of the associated function(s) is made only when TAPI and CAPI clients are installed on your PC.
·
The number of TAPI licenses currently in use (max. 10) is indicated when there is a TAPI connection with
the PABX system.
·
The number of CAPI licenses (max. 10) is indicated, along with allocation of the internal and external B
channels (max. 2 each), when there is a CAPI connection with the PABX system.
Introduction Router functions
8