elmeg T444, Руководство пользователя, Страница: 14 / 36

Note
The network adapter connected to the PABX system must be linked to the TCP/IP protocol, which is a component
of Windows. You may have to manually add this protocol. The network adapter may only be linked to the T-DSL /
PPP0E protocol, especially if a stand-alone version of the T-DSL driver has been installed. Add the TCP/IP protocol
manually using the buttons »Add«, »Protocol«, »Microsoft«, »TCP/IP«.
·
Then specify that the PC is to receive its IP address automatically. All other settings, for example DHCP,
network mask, gateway and DNS server should be de-activated or blank. The PABX system automatically
transfers all required settings to the client (PC) via DHCP.
·
Confirm your settings by clicking OK.
Example Windows 2000 and Windows XP:
·
Open the Control Panel from the Windows Start Menu.
·
Under Windows 2000 open the folder »Network and Dial-up Connections«.
·
Under Windows XP open the folder »Network connections«.
·
Select the »LAN Connection« for the PABX by pressing the right mouse button. Then click »Properties«.
·
Select »TCP/IP« and click »Properties«.
·
Then specify that the PC is to receive its IP address automatically. All other settings, for example DHCP,
network mask, gateway and DNS server should be de-activated or blank. The PABX system automatically
transfers all required settings to the client (PC) via DHCP.
·
Confirm your settings by clicking OK.
Note
Also follow the instructions given in the documentation and the Help function of your operating system. If it is not
possible to set up a connection to the PABX, or to the Internet, refer to the section »Checking the LAN client (PC)
configuration« in this manual.
Configuration examples Address assignment by DHCP -Recommended configuration - (Default setting)
10