>
Each handset can be enrolled
at up to four base stations. Use
the arrow keys to select the
number under which the sys-
tem is to be stored (»
1
«...»
4
«).
ˆ Create
ˆ System 1
ˆAC:________
O
Confirm your entries by pres-
sing OK.
ˆSubscription
ˆ Wait!
Once you have successfully completed logging on your
unit this is indicated by an acoustic signal and by this
symbol
in the display of your handset.
If the message »
Subscription Failed
« appears in
the display, acknowledge by pressing the OK button and
repeat the entire procedure.
Press the menu key to return to the idle status for the
handset.
Logging on other handsets using the master
handset
Before you can log on further handsets at the base stati-
on you must first enter the serial numbers for these units
at the base station. The serial number for the handset is
located on the nameplate beneath the battery.
Perform the following steps on the master handset:
M
Press the menu key.
ˆ Profile
ˆ Setup
>
Use the arrow buttons to select
the menu »
Servicee
« (1x to
the right).
ˆ Menu
ˆ Service
O
Confirm your selection by pres-
sing OK.
ˆ View
ˆ CLIP-Stack
ˆ <Enter>
<
Use the arrow buttons to select
the menu »
Read/Write -
User data
« (2x to the left).
ˆ Read/Write
ˆ Userdata
ˆ <Enter>
O
Confirm your selection by pres-
sing the OK key. The serial
number for the master handset
is then displayed on channel 0
(first handset).
ˆ Chan. 0
ˆ IPEI
ˆ012345678901
>
Use the arrow keys to select the
channel for the handset that
you are logging on and enter
the serial number for that unit.
ˆ Chan. 1
ˆ IPEI
ˆ123456789012
O
Confirm your entries by pressing OK.
6
28
G:\_elmeg\DECT300\Handset\V1\Ger-UK\de_uk-d300-mn-10x1.vp
Dienstag, 12. Februar 2002 10:31:01
Farbprofil: Generic CMYK printer profile - None
Komposit Standardbildschirm
