Page 4
Operation manual ISOTEST HV
3. Operation
3.1 General Instructions
Immediately after unpacking, inspect the voltmeter and the
accessories for damage and/or missing parts.
If damage is discovered, notify the supplier immediately.
Under no circumstances is the voltmeter to be put into
operation in a damaged condition.
Before using the voltmeter for measuring, the 4 included
AA cells must be inserted into the battery compartment on the
back. Ensure the correct polarity!
3.2 Safety
The high-voltage impulse voltmeter ISOTEST HV has been exclusively de-
signed for manual measuring of impulse voltages and may only be used for
this purpose.
-
The equipment is not designed for continuous stationary operation!
-
Other use than described above is inappropriate use!
Please note that:
operating the equipment in explosion-hazard environments is
strictly forbidden.
Proper use extends to reading these operating instructions as well as
meeting all relevant requirements, especially safety regulations.
Furthermore, all inspection and maintenance should be performed within
the specified time intervals.
If ISOTEST HV is not used as described above, safe operation cannot be
guaranteed.
