Elmec B-Max 100, Инструкция по использованию, установке и обслуживанию, Страница: 15 / 23

3
1 GENERAL INFORMATION
1.1 General warnings
l
WARNING
–
This manual is the property of Elmec Group S.r.l. and its contents may not be copied or passed on to third parties.
All rights reserved.
–
The appliance is not designed to be used in environments with a potentially explosive atmosphere.
–
This manual is an integral part of the product; make sure that it is always kept with the appliance, even in the
case of sale/transfer to another owner, so it can be consulted by the user or by the staff authorised to carry out
maintenance and repairs. Read this manual thoroughly before using the appliance in order to ensure operation-
al safety.
–
In the event of doubts concerning the conditions and/or working of the appliance or its parts, the local distrib-
utor should be contacted for further information.
–
Only use original spare parts or ones approved by the manufacturer in order to avoid damage to the product.
–
In the event of damage to the packaging of the goods, inform the courier and the product supplier of the prob-
lem immediately.
–
Carry out the operating tests on the appliance and inform the supplier of the product of any anomalies or run-
ning defects found.
1.2 Restrictions
d
IT IS FORBIDDEN
–
Do not use the appliance in areas with a potentially explosive atmosphere.
–
Do not carry out modifications to the product without the written authorisation of the manufacturer.
–
Do not open the door of the boiler when it is in use.
–
Do not store inflammable materials close to the burner, to minimise the risk of fire.
–
Do not leave the appliance exposed to the weather.
–
Do not install the appliance onto heat generators (boilers, water heaters) situated in places which are poorly
ventilated or are very damp. The vents in the building must be sufficiently large to guarantee complete com-
bustion.
–
Do not touch the appliance with parts of the body which are wet, or damp and/or with bare feet.
–
The appliance must not be used by children or by people who are inexperienced.
1.3 Conformities
The burners B-Home Round 25 and B-Essential Round 50 are in compliance with European directives:
–
Machinery Directive 2006/42/CE
–
Electromagnetic Compatibility Directive 2014/30/CE
–
Low Voltage Directive 2014/35/CE
as stated in the Conformity Certificate supplied with the appliance.
2
INTRODUC TION
Dear Clien t,
We w ould like to thank y ou for ha ving chosen a B-Max appliance.
The model chosen by you , is a high-per for mance produc t, with an adv anced technolog ical conc eption, high reliabilit y and
excellen t construc tion quality.
We advise y ou to en trust the running and main tenanc e of this applianc e to qualified pr ofessionals that y ou kno w, and also
to use only or iginal spar e parts when needed .
This manual c ontains impor tant guidelines and suggestions which should be c omplied with in order t o obtain a simple in-
stallation and the best possible use of the applianc e.
INDEX
SYMBOLS USED IN THE MANUAL AND THEIR MEANING
l
WARNING
To indica te inf orma tion about particular details .
m
WARNING C AUTION
To indica te inf orma tion about particular ly sensitive details .
a
WARNING D ANGER
To indica te ac tions, which, if not car ried out c orrec tly, can cause injur ies of a generic k ind or can cause malfunc-
tions or mater ial damage to the appar atus; so they r equire special a tten tion and proper pr eparation.
f
WARNING D ANGER ELECTRICIT Y
To indica te ac tions, which, if not car ried out c orrec tly, can cause injur ies from elec tricit y; so they r equire special
att ention and pr oper prepar ation.
d
IT IS FORBIDDEN
To indica tion actions which MUST NO T be taken.
1 Gener al infor mation 3
1.1 Gener al war nings 3
1.2 Restr ictions 3
1.3 Conf ormities 3
1.4 Structur e 4
1.5 Burner descr iption 5
1.6 Safet y devices 5
1.7 Size 5
1.8 Acc essories 5
1.8.1 Supply feed c ochlea: size and w eight 6
1.8.2 Pellet c ontainer : size and w eight 6
1.9 Technical da ta 6
1.10 Oper ational wir ing diagram 7
1.11 Running 8
1.12 P ellet 8
1.13 C ontr ol Panel 9
1.13.1 V iewings on Scr een 9
1.14 U ser paramet ers 10
2 Installa tion 11
2.1 Deliv ery and iden tification of the pr oduct 11
2.1.1 Identifica tion 11
2.1.2 Con ten ts of the package 11
2.2 Handling 11
2.3 Installa tion location 12
2.4 Moun ting the burner 12
2.5 Moun ting of the loading cochlea and the pellet
con tainer 13
2.6 Release of exhaust fumes 13
2.7 Electr ical connec tions 13
3 Start-up 14
3.1 Bef ore star ting up the burner 14
3.2 First ig nition 14
3.3 Checks to car ry out af ter the first ig nition 14
3.4 Aut omatic shut -do wn and subsequent star t-ups 14
3.5 Pellet calibr ation 14
3.6 Prog ramming of user par ameters 15
3.7 List of paramet ers 17
3.7.1 Technical par ameters 17
3.8 Alarm messages 18
3.9 Problems - P ossible causes - Solutions 18
4 Main tenanc e 19
4.1 Per iodic maintenanc e 19
4.2 Disposal 20
15
SAFETY
GENERAL WARNINGS
WHEN OPERATING THE BOILER, PLEASE ACT WITH UTMOST CARE,
WITH SPECIAL REGARD TO THE FOLLOWING CASES:
• Do not come near and touch the flue exhaust pipes: BURN HAZARD
• Do not clean the boiler while it is operating. ACCIDENT HAZARD
• Each time, before you turn on the boiler, check the electrical connections
an the proper functioning of the heat sensors.
• Do not open the boiler door when the pellet burner is turned on.
• Do not remove the ash when the burner is turned on
• Do not let children or animals come near the boiler
• During operation, the external boiler surfaces might get hot
TO PROPERLY USE THE PELLET BUNER, APPLY THE FOLLOWING MEA-
SURES:
• Ensure its regular maintenance with the boiler turned off.
• If you identify and operational defects, do not use the device until proper
• troubleshooting.
• Pouring water into the device is forbidden and implies an explosion haz-
ard, even in case of a fire.
• When turning off the pellet burner, wait until the shutdown process
ends and disconnect it from the electrical network only afterwards
• Do not use the boiler as a kiln
• Before any work, please check whether the combustion chamber and the
ash have cooled down and you have disconnected the device from the
electrical network.
• Although the handles of the boiler doors are fitted with thermo-resistant
coating, it is recommended to wear protective gloves.
• Use parts and spare parts recommended by the manufacturer only.
• Do not open the boiler door during the operation of the pellet burner.
• If you detect any condensation, search for the root cause. Check whether
the device has been installed and operated properly.
• Remove the combustion product from the ash container.