7
Technical Support: +44(0)23 9269 6638 (option 3)
PAK200546_03A Mar 2020 ©2020 ELMDENE INTERNATIONAL LTD
O
PERATING
I
NSTRUCTIONS
In the event of loss of mains, a battery fault or a GEN fault, the corresponding Fault signal contacts will open.
If the output of the PSU fails, the cause of the failure should be investigated e.g. short circuit load,
connection of a deeply discharged battery. The fault should be rectified before restoring power to the PSU. If
any of the fuses require replacing, ensure the correct fuse rating and type is used.
M
AINTENANCE
This unit is intended for use by Service Personnel only. There are NO USER SERVICEABLE parts inside.
There is no regular maintenance required of the PSU other than periodic testing, and replacement of the
standby battery.
Reference should be made to the battery manufacturer's documentation to determine
typical/expected battery life with a view to periodic replacement of the battery.
D
IAGNOSTICS
Local Diagnostics
Green LED
On = Mains Present
Red LED
Fault Diagnostics according to table:
Red LED
(fault)
Green LED
(mains)
Status
OFF
ON
Normal:
Battery fully charged
One short flash
every second
ON
Normal:
Battery charging but not fully charged
Flashing:
1second On
1 second Off
ON
Fault:
Output fuse or battery fuse blown, or
battery/PSU fault
OFF
Fault:
No mains, output fuse blown
One short flash
every 3 seconds
OFF
Fault:
No mains, battery supplying load.
OFF
OFF
Fault:
No mains, No output, battery disconnected
or completely discharged
C
OMPLIANCE
This power supply unit meets the essential requirements of the following EU Directives:
EMC: 2014/30/EU
Low Voltage: 2014/35/EU
WEEE: 2012/19/EU
RoHS2: 2011/65/EU
This product is suitable for use in systems designed to comply with
PD6662:2017 at Grade 3 and Environmental Class II
EN50131-6:2017
Type A Security Grade 3
Environmental Class II
Certification Body:
Telefication B.V.
Edisonstraat 12A
Zevenaar, 6902 PK
The Netherlands
+31 (0) 316 - 583 180
http://www.telefication.com
