background image

 

 

Technical Support: +44(0)23 9269 6638 (option 3)             PAK200546-CHUBB_02DC   Feb 2021 

©2021 ELMDENE INTERNATIONAL LTD  

 

D

ISPOSAL OF 

P

RODUCT AT 

E

ND OF 

L

IFE

 

 

 
This product falls within the scope of EU Directives 2012/19/EU Waste Electrical and Electronic Equipment 
(WEEE) and 2013/56/EU(Battery). At the end of life, the product must be separated from the domestic waste 
stream and disposed via an appropriate approved WEEE disposal route in accordance with all national and 
local regulations. 
Before disposal of the product, any batteries must be removed, and disposed separately via an appropriate 
approved battery disposal route in accordance with all national and local regulations. Package used batteries 
safely for onward transport to your supplier, collection point or disposal facility. 
 

Caution:  Risk of fire or explosion  

if bare battery wires are allowed to touch. 

 
See  Specification  for  battery  type  information.  The  battery  is  marked  with  the  crossed  out  wheelie  bin 
symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg).  

For more information see: 

www.recyclethis.info

 

 
 
 
 

The packaging supplied with this product may be recycled. 

 Please dispose of packaging accordingly. 

 

Содержание 20182423N









Отзывы: