9
MEMORANDUM REC.
*OFF ON
BARCODE PROGRAM
*0000 0000 0000
BARCODE PROGRAM
INSERT TICKET
BARCODE PROGRAM
COD. 9451 VAL.01
BARCODE PROGRAM
****ERROR****
BARCODE PROGRAM
*9451 0000 0000
INFORMATION RECEIPT
This option allows you to enable (ON) or disable (OFF) the “ONLY
MEMORANDUM” receipt printing for the customers provided of magnetic card.
With the UP and DOWN buttons you move the asterisk
(*) and then press ENTER.
BARCODE PROGRAMMING
To enable the identification of ticket with
barcode, you need to move the switches
on the sensor as shown in the table:
SW 1 SW 2 SW 3 SX 4
MODE
ON
ON
OFF
OFF
BARCODE
This option allows you to save the tickets
barcodes that will
then be accepted.
The machine can recognize, maximum, 3 different
codes at the same time. With the UP and DOWN
buttons you select the position, between the 3 possible
solutions, in which you’d like to save the new code and
then press ENTER.
As required from the message on the display, insert a
barcode ticket to save. If the reading is not successful,
an error message will show, otherwise the read code
will be showed and you could set the ticket value with
the UP and DOWN buttons. At the end press ENTER to
save and exit from the menu.
BARCODE CANCELLATION
To delete a code previously saved: with the UP and
DOWN buttons, select the code that you want to
delete. Press ENTER to do the operation and exit the
menu.
