5
Fig.1
MANUAL CONFIGURATION
For the programming buttons and service display on the motherboard are used (Fig.
1). Opening the door, the machine turns off and the inner service lights turn on.
To turn the machine ON, with the door open, and proceed with the programming, you
need to pull the upper security switch out.
(Fig.2).
When the machine is ON, the service display will show in sequence the total of
counted tickets, number of tickets counted in a day, hour and date. These are the
buttons and their functions:
•
ENTER: enter in programming, enter the selected menu, stores the current data and
pass on the next data
•
ESC: exit the programming, exit the selected submenu, go back to previous data.
•
Up: go to the following menu or submenu, increments the current parameter.
•
DOWN: go back to the previous menu or submenu, decrements the current
parameter.
EXAMPLE:
Suppose you want to program to 10 the minimum number of ticket to print the
receipts. Follow these steps:
1.
Open the door (the machine turns OFF).
2.
Pull the upper security switch (the machine turns ON).
3.
Press the ENTER button (the display will show “PROGRAMMING”).
4.
Press the ENTER button (the display will show “LANGUAGE”).
5.
Press 8 times the UP button until you reach the submenu “MINIMUM FOR PRINT”
6.
Press the ENTER button (the display will show in the bottom line the number of
tickets currently programmed).
7.
With the UP and DOWN buttons increment or decrement the number until you view
the desired value.
8.
Press the ENTER button (the value is stored and you come back to the submenu
“MINIMUM FOR PRINT”.
9.
Press the ESC button (you come back to the “PROGRAMMING” menu).
10.
Press the ESC button (you exit the programming and return to normal operation).
11.
Push the upper security switch (the machine turns OFF).
12.
Close the door (the machine turns ON).
