Putting unit into operation
24
BA_ES xtra ST_EN_Vers.08.2016
© Elma Schmidbauer GmbH
6.6
Cleaning in ultrasonic mode
dynamic
The
dynamic
function ensures more efficient ultrasonic cleaning
power. The constant switch between the sweep and pulse
functions
provides both even power distribution and
amplification.
In addition, it takes less time for the unit to be ready for
operation after an exchange of the cleaning liquid or when a
new basket has been inserted (when the cavitation threshold is
reached). This shortens the overall cleaning period.
There are certain operating phases with a reduced ultrasonic
cleaning effect due to physical reasons.
In particular when the cleaning liquid has been exchanged or
when a new basket with cleaning items has been inserted the
cleaning effect is temporarily reduced. An efficient ultrasonic
cleaning cannot be guaranteed during these phases.
The
dynamic
function switches off automatically after 10 min.
Press both keys
ultrasound
and
dynamic
(
). The
green LED in the key indicates the operation in
dynamic
mode.
Dynamic
can be switched on or off as required during
operation.
Cleaning items with sensitive surfaces may be adversely
affected by a combination of
dynamic
and 25 kHz. Please treat
sensitive items at 25 kHz plus
dynamic
for short periods only.
Also, the sound-giving surface of the cleaning tank is subject to
a higher degree of cavitation erosion.
How to activate the
pulse
mode
NOTE
