Elma Schmidbauer GmbH
Operating the unit |
Elmadry TD
17 / 24
-
10
Operating the unit
CAUTION
Hot surfaces
Burns
Ø
Allow the unit to cool down or use suitable gloves when loading/
unloading objects.
NOTICE
To prevent overheating of the unit:
Ø
Do not use any other lid than the one supplied with the unit.
Ø
Make sure that the air inlets are not blocked.
Ø
The wire mesh on the bottom of the tank should not be covered
more than 70%.
NOTICE
Too much water inside the unit leads to damage.
Ø
Allow excess water to drip off the basket and the objects before
drying.
NOTICE
To prevent stain formation, rinse the objects thoroughly in DI water
before drying.
ü
The network cable has been connected.
ü
The objects to be dried have been rinsed.
1. Allow the excess water to drip off the objects or the stainless steel basket.
2. Place the objects on the grid inside the tank, or hang them in the tank in a stainless
steel basket.
è
NOTICE! The diameter of the objects must not be smaller than the mesh
size of the wire mesh.
3. Replace the supplied lid.
