•
The vehicle should be driven in only specified areas by trained drivers.
•
Never attempt jumps or driving off ledges.
•
Do not drive the vehicle into water or leave the vehicle in a place where it is susceptible to being
immersed in water exposure to water may lead to damage to the motor, batteries or other electric
parts.
•
Do not drive the vehicle into a drive-in cart wash, do not use a high-pressure cleaner.
•
This vehicle is not intended to be used where there is a risk of falling objects. As far as golf
courses as concerned, familiarize yourself with the local guidelines for avoiding getting hit by golf
balls.
•
Do not drive the vehicle under tree limbs, bridges, tunnels, or other objects that are less than 80
inches (200 cm) from the ground.
•
Use caution when operating the vehicle with golf bags or other accessories attached multi-mount.
Accessories add to the length and/or width of the vehicle, increasing the likelihood of striking
nearby persons or objects, which can cause damage or personal injury.
•
Transporting the ELLWEE inside another vehicle or on a trailer is done at one's own risk, seek
appropriate advice on how to secure the vehicle properly.
The manufacturer and distributor take no responsibility for accidents,
Malfunctions or other misfortunes occurring as a result of the owner, rental customer or driver not respecting the
guidelines for safe operation of the ELLWEE.
3.3.
DRIVING INSTRUCTIONS
3.3.1
STARTING THE VEHICLE
1. Read the safety labels located on the vehicle.
2. Study and understand controls.
3. Make sure any load is secure.
4. Turn on the main switch.
5. Make sure that the driver is seated and secured, the driver should have both hands on the steering
handle.
6.
Make sure wheels are turned in desired direction and that nothing is obstructing vehicle’s path.
7. Insert the ignition key.
8. Start the vehicle by turning the ignition key to the on position.
9. Switch off the epb
10. Brake with both brake handles simultaneously to activate the vehicle.
11. Select direction with the forward/reverse switch.
12. Release the brake handle
13. Slowly turn the throttle.
14. Be ready to press the brake handle, if necessary.
3.3.2
STOPPING AND SWITCHING OFF THE VEHICLE
1.
Make sure the vehicle is parked in a safe and level location.
2.
Ensure the wheels are turned in desired direction and not towards a downhill incline.
3.
Place the forward/reverse switch in the desired position
4.
Activate the epb (
to check if it’s activated try to move the vehicle by pushing/pulling).
5.
Switch off by turning the ignition key counter-clockwise.
6.
Remove the key.
7.
Turn off the main switch
