Using the Setup Menu
Using the Setup Menu
48
3
ANALOG CHANNEL SCAN
This recorder has a built-in TV tuner for
recording TV programs.
• While doing Channel Search, it will erase and replace
all previously stored channels.
• This feature is available only when the recorder is set to
the TV mode.
NOTE
Press ENTER button after selecting
“SCAN” by pressing or button.
1
Press ENTER button to confirm after
selecting “OK” by pressing or
button.
It will search channels automatically.
If the broadcasting is found during auto
searching, it is stored automatically.
2
4
MODIFY CHANNEL
(If there is no captured channel, this feature
is not available.)
4-1
Press ENTER button after selecting
“EDIT” by pressing or button.
The information of the current channel will
show on the screen.
4-2
Select the channel you want to modify
by pressing CHANNEL - or C
button.
Press ENTER button after selecting “Name”
by using or button.
1
Input letters which you want to input by using
, , , button, and press ENTER button
to confirm it.
2
Editing the channel name
Set the TV system used for the current channel.
TV Standard
Select “Standard” by using or button,
and press ENTER button.
1
Select the TV system by using or
button, and press ENTER button.
2
If the captured signal is bad, you can search the
channel again by frequency or channel number.
Search Type
Select “Search Type” by using or
button, and press ENTER button.
1
Select “Frequency” or “Channel” by using
or button, and press ENTER
button.
2
Select “Frequency” or “Channel” by
using button, and press or
button.
It starts to search the broadcasting
automatically.
If the broadcasting is found during
searching, it stops to search.
If you want to stop searching, press
STOP button.
3
If the captured signal is not good, you can tune
the channel fine.
Fine Tuning
Select “Fine Tuning” by using or button.
1
Tune the channel fine by pressing or
button.
Each time or button is pressed, the
channel frequency decreases or increases by
50KHz.
2