page 8
9. Light Kit Assembly.
Remove 1 screw from motor plate on
underside of motor assembly and partially
loosen the other 2 screws. Align slotted holes
in center of fitter plate with loosened screws
in motor plate, allowing molex connections
from motor assembly to come through hole
in middle of fitter plate. Twist fitter plate to
lock. Re-insert screw that was previously
removed and securely tighten all 3 screws
with Phillips screwdriver.
Remove 1 screw from underside of fitter plate
and partially loosen the other 2 screws.
Connect
WHITE
wire from motor assembly to
WHITE
wire from light kit fitter. Connect
BLACK
(or
BLUE
) wire from motor assembly
to
BLACK
wire from light kit fitter. Be sure
molex connections snap together securely.
Align slotted holes in light kit fitter with
loosened screws in fitter plate. Twist light kit
fitter to lock. Re-insert screw that was
previously removed and tighten all 3 screws
securely.
Install 3 candelabra base 40 watt max. bulbs
(included).
Important
: When replacing bulbs, please
allow bulbs and glass shade to cool down
before touching.
Remove finial and threaded washer from
bottom of light kit fitter.
Align hole in center of glass shade with
threaded rod on light kit fitter and push up
gently until threaded rod comes through hole.
Secure glass shade with threaded washer that
was previously removed.
Do NOT overtighten
threaded washer as glass may crack or break.
["Light Kit Assembly" continued on next
page.]
molex connections
bulb
light kit fitter
glass shade
threaded
washer
motor plate
fitter plate
motor assembly
molex connections
fitter plate