manualshive.com logo in svg

Ellie SENTRY 200, Руководство по эксплуатации, Страница: 4 / 22

Поделиться
Скачать
Ellie SENTRY 200 Скачать руководство пользователя страница 4

4

FEATURES OF THE SENTRY

®

 200 INSTRUMENT

The SENTRY

®

 200 is a portable instrument used for specific diagnostic tests known as fluorescence polarization 

assays. This instrument has been designed to provide an easy and accurate method for performing tests on site as 

well as in a laboratory setting. The SENTRY

®

 200 can be used to perform one test (single assay) or a single type of test 

for a larger group of samples (batch assay).

The SENTRY

®

  200  is  a  single  well,  fluorescence  polarization  instrument.  All  necessary  optics,  electronics  and 

computing capabilities are included within the instrument.  

DO NOT OPEN THE INSTRUMENT HOUSING OR REMOVE ANY PARTS.  Opening the instrument housing may void 

the warranty.  Do not attempt to disassemble or modify the instrument. There are no user serviceable parts inside 

the instrument. This machine contains high voltage components. Never attempt any maintenance procedure not 

described in this manual. Incorrect maintenance procedures may damage instrument or cause electrical shock.

Please allow Ellie to perform all maintenance, repairs and servicing.   

Electrical Power 

The SENTRY

®

 200 may be powered by plugging the provided 

power  adapter  into  a  wall  outlet  (100-240  volts,  50-60Hz). 

Adapters for different types of wall plugs are included with the 

device.  The instrument may also be powered by a battery or by 

the car cigarette lighter adapter.  

Operating Environment

The SENTRY

®

 200 has been designed as a portable instrument 

appropriate for both on site and laboratory use.  Designed 

for  field  conditions,  the  SENTRY

®

 200 should perform in all 

reasonable environments, provided that the internal optics 

remains clean and dry.  

The instrument will function under environmental 

temperatures  between  39o  F  and  115o  F  (4o  C  and  46o  C).  

 

The SENTRY

®

 200 is neither water resistant nor waterproof.  It 

should not be submerged in any liquids.  The exterior of the 

instrument housing may be cleaned with a soft, damp cloth.

Always prepare a sample before inserting it into the 

 

SENTRY

®

  200.    NEVER  PIPETTE  INTO  A  TUBE  WHEN  IT 

IS  INSIDE  THE  SENTRY

®

 200.  Spilling liquid or breaking 

glass inside the instrument’s optic chamber will damage the 

SENTRY

®

 200 and likely require repair.  

NEVER TRANSPORT THE SENTRY

®

 200 WITH A TEST 

SAMPLE TUBE INSIDE IT. WHEN FINISHED RUNNING 

SAMPLES ALWAYS REMOVE THE TEST TUBE AND CLOSE 

THE TOP OF THE OPTICS CHAMBER TO PREVENT THE 

ACCUMULATION OF DUST. 

Always use clean glass 10 or 12 mm by 75 mm borosilicate test 

tubes with the SENTRY

®

 200. 

Содержание SENTRY 200























Отзывы:

Нет отзывов