1 / 2
SOU-3
cos φ ≥ 0.95
M
M
HAL.230V
K
M
M
AC12
250V / 7.5A
DC14
24V / 1.5A
AC1
250V / 12A
AC13
250V / 4.5A
AC2
250V / 3.7A
AC14
250V / 4.5A
AC3
250V / 2.2A
AC15
250V / 4.5A
AC5b
1120W
DC5
24V / 3A
AC6a
x
DC12
24V / 12A
AC7b
250V / 2.2A
DC13
24V / 1.5A
02-69/2016 Rev.: 2
J1
J2
J3
SOU-3
SOU-3
0
1
2
10
100
1.000
1.000
10.000
100.000
L
15
18
L
N
1
2
3
4
5
6
7
4
L
N
L
N
L
15
18
L
N
L
N
L
15
18
Made in Czech Republic
ELKO EP, s.r.o.
Palackého 493
769 01 Holešov, Všetuly
Czech Republic
Tel.: +420 573 514 211
e-mail: [email protected]
www.elkoep.com
Twilight and light switch
•
serves as control of the device on the basis of ambient light intensity.
•
external version in IP65, box for mounting on the wall
•
exact built-in light sensor
•
two devices in one, function setup by jumper:
- twilight switch - ramps down during decreasing ambient light intensity, ramps
up during increasing. Used for switching the lights during twilight and in the
night (street illumination and garden lights, illumination of advertisements,
shop windows, etc..)
-light switch - ramps down during increasement of ambient light intensity,
ramps up during decreasement. Used for switching the lights after reaching
the ambient light seting e.g. shinning of sun (blinding - shutters and Venetian
blinds, solar panels - activation...)
•
adjustable (by jumper) ranges of light level
•
3 adjustable levels of time delay (for elimination of short-term fl uctuations of light
intensity, for example car refl ectors lighting)
•
supply voltage 230 V AC
•
potentialless NO contact 12 A / AC1 switching
Note:
Device is supplied with jumper L-15 (3-wire connection).
For the correct function of device is neccesary sensor-side down device mounting.
Attach the device with a suitable bonding material based to the substrate (eg round
head screw, Ø 4 mm, min. Length 30 mm).
Characteristics
Description
Connection
Type of load
Mat. contacts AgSnO
2
,
contact 12A
Type of load
Mat. contacts AgSnO
2
,
contact 12A
AC5a
uncompensated
230V / 2.2A (510VA)
DC1
24V / 12A
AC5a
compensated
230V / 2.2A (510VA)
to max. input C=14uF
DC3
24V / 4.5A
EN
- Light switch
- Twilight switch
1. Cable gommet M16x1.5 for cable max.
Ø 10 mm
2. Adjustable range setting (Lx)
3. Delay (min)
4. Hole for mounting on the wall Ø 4.3 mm
5. Function setting
6. Slight setup fi nish in the frame of range
7. Sensor of ambient light
3-wire connection
4-wire connection
jumper for
L potential
potentialless
NO contacts
