Page 6
1000004006 (Rev. A - 08/2017)
EFRC12C_2AWR
Service
•
Safety Glasses
•
Protective gloves
•
5/16” (8mm) Hex Socket or Flathead Screwdriver
•
3/32” (2.4mm) Hex Key
Service: Inspection/Cleaning
•
Inspect Cooler twice each year for proper operation and performance.
•
Inspection of the unit will require disconnecting electrical supply, removal of panels, etc. and reassembly and return to service practices.
1. Cleaning: Warm, soapy water or mild household cleaning products can be used to clean the exterior panels. Extra caution should be used to
clean the mirror finished stainless steel panels. They can be easily scratched and should only be cleaned with mild soap and water or Windex
glass cleaner and a clean, soft cloth. Use of harsh chemicals or petroleum based or abrasive cleaners will void the warranty.
2. Ventilation: Cabinet louvers and condenser fins should be periodically cleaned with a brush, air hose or vacuum cleaner. Cleaning should be
done twice each year or more frequently if needed due to environment. Excess dirt or poor ventilation can cause no cold water and compressor
cycling on the compressor overload protector.
3. Water Flow: Confirm proper water flow. If water flow is slow, inspect filter or inline strainer for restriction. Replace filter cartridge if required.
Disassemble inline strainer and clean if required.
4. Actuation of Quick Connect Water Fittings: Cooler is provided with lead-free connectors which utilize o-ring water seal. To remove tubing from
the fitting, relieve water pressure, push in on the gray collar before pulling on the tubing. To insert tubing, push tube straight into fitting until it
reaches a positive stop, approximately 3/4” (19mm). See Figure 8.
NOTE: WATER FLOW
DIRECTION
Figure 7
TUBE IS SECURED
IN POSITION
SIMPLY PUSH IN
TUBE TO ATTACH
PUSH IN COLLET
TO RELEASE TUBE
PUSHING TUBE IN BEFORE
PULLING IT OUT HELPS TO
RELEASE TUBE
Figure 8
For Replacement Parts, contact your local distributor or call 1.800.834.4816
Elkay Manufacturing Co. 2222 Camden Court Oak Brook, IL 60523 U.S.A – 630.574.8484
For proper and safe servicing, please read these instructions completely.
DANGER
•
All Service and Maintenance must be performed by an authorized service personnel.
•
Disconnect electrical supply to the unit before any service work to reduce risk of electrocution.
•
Shut off water supply serving the unit before any service work to reduce risk of water damage.
CAUTION
•
Tools/Items required but not provided, for Servicing:
1/4" O.D. TUBE
WATER INLET
FROM CHILLER
IN-LINE
STRAINER
(PROVIDED)
3/8" (9.5mm) O.D.
UNPLATED COPPER
TUBE (NOT PROVIDED)
BUILDING WATER SUPPLY
WATER SHUT-OFF VALVE
(NOT PROVIDED)
REPLACEMENT
PARTS LIST
ITEM NO.
PART NO.
DESCRIPTION
1
1000004196
Kit - Push Button Assy
2
40480C
Precooler
3
40038C
Strainer
4
62084C
Tube Assy - GF
5
56092C
Poly Tubing 48”(Cut to Length)
6
40619C
Ferrule
7
70151C
Gasket
8
70234C
Washer
9
1000004289
Bubbler Assy
10
40299C
Drain - 1/2”
11
1000004175
Glass Filler
12
50258C
Washer
13
61099C
Connector Assy
14
1000001994
Kit - Tee 1/4 (3 Pack)
15
1000002162
Kit - Union 1/4 (3 Pack)
16
1000004069
Strainer
17
110669443890
Screw - #10 x .63 PHSM
18
74070030
Screw - #8 x 1.00 PH
19
74070032
Speed Nut - #8
20
70567C
Clip - Speed
21
EFRCDF
Fountain - GF
22
EG23
Grill
23
31525028
O-ring
24
75580C
Locknut
