background image

Page 4

Elkay Manufacturing Company 

  

(630) 574-8484 

 

 

2000000698 (Rev. A - 07/22)

ECP8_1J     ECP8_2J     ECP8_3J          

To avoid product or property damage, personal 

injury, or even possible death, carefully read, 

understand, and follow all the instructions in 

this Installation / Use & Care Manual before 

installing this product. 
After installation, keep these instructions in a 

safe location for future reference.
Do not operate power tools unless you read and 

understand the instructions and warnings in 

this and all other applicable labels or manuals. 

Proper use of tools and the products described 

in this guide is your responsibility. 

Lifting Hazard

 

• To avoid personal injury, always use 

these proper lifting techniques and use 

two people to move heavy cartons.

•  Use appropriate lifting devices to move 

the load.

•  Always use two people when lifting 

heavy or bulky cartons. DO NOT attempt 

to lift objects that are too heavy.

Power Tool Hazard

 

•  To prevent personal injury or possible 

death, always follow the electrical safety 

recommendations of the power tool’s 

manufacturer.

•  Do not use power tools in an unsafe manner

•  Power tools should only be connected to a 

circuit protected by a ground-fault circuit 

interrupter (GFCI).

• 

If an extension cord is required, always use 

an OSHA approved extension cord.

 

Shock and Electrocution Hazards 

Failure to follow these instructions could result 

in severe burns, significant injuries, and even 

death.

Water will conduct electric current to 

create a short circuit, resulting in injury or 

death.

•  Never use electric power tools around water 

or wet floors/surfaces. 

•  Keep all liquids away from electrical cords 

and power tools. 

• 

If an extension cord is required, always use 

an OSHA approved cord. 

•  DO NOT create a short circuit between a 

source of electricity and a liquid by being in 

contact with both simultaneously.

Contacting live electrical wiring with 

power tools or hand tools can cause 

serious injury or death.

Prior to any maintenance, make sure the unit is 

unplugged and circuit breakers are turned OFF.

Prior to installation, test for live circuits or wiring 

inside the wall before cutting or drilling into the 

wall.

Failure to follow these instructions could 

result in personal injuries, water damage, and 

other damage to floors, pipes, walls, and other 

portions of your building or home.

CAUTION

Follow all instructions related to installation and/

or maintenance of this product.
This appliance is not intended for use by persons 

with reduced physical, sensory, or mental 

capabilities or lack of experience and knowledge, 

unless they have been given supervision or 

instructions concerning use of the appliance by 

a person responsible for their safety. Children 

shall not play with the appliance. Cleaning and 

user maintenance shall not be made by children 

without supervision.
To prevent a metallic taste or increased metal 

content in the water due to an electrolysis 

process caused by electrical feedback from the 

grounding of electrical equipment to water mains, 

connect to the water mains using a dielectric 

coupling.

Personal Protection

   

Be sure to use all personal protective 

equipment, such as sturdy safety glasses, work 

shoes, hearing protection, and gloves, whenever 

necessary, to ensure your own safety.

To avoid eye injury, always wear protective 

glasses with side shields when using power 

tools. Also, make sure no one else can be 

injured by flying particles when using power 

tools.

To prevent possible damage to your hearing, 

always wear ear protection, such as earmuffs or 

earplugs, when using power tools.

Wear protective gloves during installation 

to protect against sharp edges from sheet 

metal components.

Tripping Hazard

 

 

Personal injury can result from tripping over 

power cords, tools, or other installation items. 

DO NOT leave items laying around the work 

area.

Cutting Hazard 

 

The installation of this product may require 

using power tools. 

Keep hands away from the cutting edge of any 

tool used in the installation of our product. 

Placing fingers in or around the cutting blades 

could result in serious personal injury.

Содержание ECP8











Отзывы: