Elektroschloss E 205
4
2
Electromagnetic Bolt E 205
2.1 Usage
Electromagnetic bolt E 205 to lock swing gates. The bolt locks either
downwards or to the side.
When using the electromagnetic bolt sidewards, it must be protected from
moisture by a cover (on site).
2.2 Technical
data
Power supply
24Vac (Alternating current)
Maximum current
approx. 6.0A during stroke movement
approx. 1.0A during stop position
Degree of protection
IP43
Emergency release
With key (cylinder lock)
Measurements (W x H x L)
94 x 295 x 58mm
Stroke 50mm
Table 1
2.3 Electrical
connection
The cross section of the cable to the bolt depends on the distance between
the controller and the electromagnetic bolt:
up to 50m: 1.5mm
2
Please note that with an increasing distance between controller and swing
gate the range of the radio remote control decreases, since the radio remote
control receiver is plugged onto the controller.
Intelligent Security & Fire Ltd.
