8
Motion Sensors (PIR)
bATTeRy RePLACeMeNT
The R15 PIRs use an Ultralife U9VL 9V battery.
* Example device
number
OPeRATION
The R15 'Pet Immune' and R15 standard PIR motion
sensors can be added to the system to provide
protection in additional rooms.
Maximum detection range is 50ft.
bATTeRy SAvING TIMeR
The PIRs have a unique battery saving feature
which means you must wait 5 minutes between
activations.
To test a PIR, leave the room for at least 5 minutes
and then re-enter. The red light in the PIR will flash
to indicate that it has sensed your motion into the
room. If you don't see the red light you may not
have waited long enough - try again.
Leave the
room.
Wait 5
minutes.
Red light
indicates motion
sensed.
Insert the
new battery.
Ultralife U9VL
9V battery
Unsnap cover
at the bottom.
R15
The R15 battery is inside the sensor. Carefully lift
off the sensor's cover by unsnapping at the bottom
using a flat-bladed screwdriver or blunt knife.
Insert a new Ultralife U9VL 9V battery and then test
the sensor.
Remove the
cover.
