Elk Products Cross Platform Control ELK-M1KP, Руководство пользователя

Страница: 17 / 28

M1 Cross Platform Controllers - User Guide
Page 17
Menu 3-Walk Test Area (zones)
Permits a local test of all zones assigned to the system/area. No alarms or
troubles are reported during a walk test.
To perform a walk test:
1. Press the ELK key. Enter a user code if prompted.
2. Press the UP arrow key to find: “
3-Walk Test .”
3. Press the RIGHT arrow key to start the test.
4. The keypad will display:
000of016 Tested
A1-Violate Zones
The top right hand number is the active zones on the system. The
left hand number is the number of zones that have tested.
5. Proceed to walk the building and trip every zone. As each zone is
tripped it’s name will appear on the bottom line of the display.
6. Continue walk testing until each zone is tested as indicated by the
top left hand number being the same as the number to it’s right.
7. When finished press the * key to exit back to the main display.
Menu 4-View History Log
The history log stores the most recent system activity with a time date stamp.
To view the event history log:
1. Press the ELK key. Enter a user code if prompted.
2. Press the UP arrow key to find: “
4-View History Log .”
3. Press the RIGHT arrow key to select this menu.
4. The keypad will display:
L001:xx/yy hr:mn
<event desc> 00#A$
xx/yy = month & date hr:mn = hour & min.
00# = zone or user code A$ = area or partition.
6. Press the UP arrow to scroll to earlier events. To locate an earlier
event try entering a 3 digit number to jump around in the log.
7. To backup or select another sub menu press the ELK key. To exit
out completely from the user menus press the * key.