Elk Products Cross Platform Control ELK-M1KP, Руководство пользователя

Страница: 14 / 28

M1 Cross Platform Controllers - User Guide
Page 14
Keypad Menus
This section explains the use of the most commonly used keypad menus. For
additional instruction, consult the installation company. To reach the keypad
menus press the center navigation key labeled “ELK”. A user code may be
required depending on how the control is programmed. The four arrow keys
around the Elk key are used to scroll, backup, etc. For example, press the UP
arrow key will step to menu 2.
Entering a number from 1 to 9 will jump
directly to that menu. Press the RIGHT arrow key to select a menu.
Menu 1-View/Control Automation Functions
Allows operation of many powerful automation capabilities such as: activation
of individual or group lights, irrigation sprinklers, pumps, gates, etc. There are
6 sub menus: Tasks, Lighting, Outputs, Temperature Sensor, Keypad Tem-
perature, and Thermostat Temperature.
1. Press the ELK key and enter a user code if required.
2. Press the RIGHT arrow key to select menu 1.
3. The first of 6 sub menus; “
1-TASKS ” will be displayed. Each press
of the UP arrow key will scroll through the other sub menus.
4. When the desired menu displays, press the RIGHT arrow to select.
1-TASKS Tasks are like “macros”, in that a single key press can result in one
or more actions. Tasks can simplify or automate events that might otherwise
require multiple manual steps. Example: “Water the Lawn” could turn on two
sprinkler zones for a time period. “Welcome Home” could adjust the thermo-
stat and turn lights to a level of On, Off, Dim, etc., making a room more warm
and inviting. NOTE: A task itself does not have a state of On or Off. In fact, if
a task is activated multiple times the same actions simply start again.
To activate a TASK:
1. Starting from the “View/Control Automation Functions” menu, locate
the Tasks screen and press the RIGHT arrow key to select.
2. Use the UP or DOWN keys to scroll through the list of available
tasks. To jump directly to a specific task, enter it’s 2 digit number.
(see note on next page)
3. Press the # key to activate the displayed task.
4. To backup or select another sub menu press the ELK key. To exit
out completely from the user menus press the * key.