V04062020JA-Z
2
www.elitescreens.com
Hardware and Parts List
A. Folding frame x1
B. Left/Right folding legs x2
(Adjustable)
C. Center brace x1 (Adjustable)
D. Knob Screw
(Refer to Chart)
E. Center brace foot
(Refer to Chart)
F. Projection screen material x1
G. Screen material bag x1
H.
Carrying Bag x1
I. Rope
J. Eyebolt x 2
K. Ground stake x 4
Note: The parts list above is subject to change without notice.
Models
Knob Screw
Center Brace Stand
Max Height
180” (16:9)
12 pcs
1 pc
163.3 inches
Frame Assembly
1.
Take the
folding frame (A)
out of the
carrying bag (H)
and place it on a flat surface. Fully unfold the
longer sections first, as shown below
.
2.
Next, unfold the frame until the latch on the hinge “clicks” into place. Repeat the procedure for the
shorter sections, as shown below.
Note:
When unfolding the frame and legs, be sure the latches on the hinges "click" into place. Please also
make sure all 4 corners of the frame are at a 90° angle and the hinged support bar is straight and not bent.
Fig 1
Fig 2
Fig 3
Fig 4
Fig
5
Fig
4
