V04062020JA-Z
4
www.elitescreens.com
Fig.13
Fig.14
2. Lay the frame on its backside on clean surface, then lay the legs over on the frame in the position desired.
3. Once you have aligned the leg’s holes with the frame’s holes, secure with the knob screws.
4. Tie 4 pieces of
rope
(2 on the left and 2 on the right) to the
eyebolts (J)
that are located at the top of the frame.
5. Next, lift the screen up while simultaneously opening the legs. Two people are needed for this step. Fig. 13-14.
6. Next, carefully unfold the back brace behind the leg and attach it using a
knob screw (D). Fig. 16-17.
Warning:
When attaching the legs, make sure to screw the top of the leg to the last hole of the
frame to reach max height. Attaching the legs lower to the frame and leaving an extra space on top
may cause the screen to tip over when assembled.
Location points
for legs
Fig 10
Fig 16
Fig 11
Fig 12
Fig 15
Fig 17
