7
Installation
1.
Use butterfly screws to install the upper bracket as shown in following diagrams
2.
Locate the height where you want the screen installed, and draw an upper base line. Install the
wall
bracket
(J) in the middle area of the upper base line as shown below
.
Confirm the distance between
the two brackets on the level direction following the data E of P10 diagram. Mark the hole location on
the wall by following the base line and the upper bracket’s screw hole site, and then drill the hole.
Insert the wall anchor and tighten the upper bracket using the provided screw.
Note: The upper base line must align with the upper bracket’s top edge
Upper base line
Upper bracket
Wood screw
Hollow wall anchor
Wall
Use two 1.77” brackets to assemble an
upper bracket for models below 125”
Use one 1.77” bracket and one 3.54” bracket to
assemble an upper bracket for models 125” and above.
