4
5.
Attach the fix plates
.
(1)
Stretch the material to the corner and insert the screen material’s edge in the groove of the frame. While
one hand holds the material in place the other hand snaps in the push plate (Fig.1-Fig.2).
(2)
Begin by securing the four corners in the following sequence A→B→C→D (Fig.3)
.
(3)
Insert the fix plates as shown on Fig. 2. Fix plate
①
is about 10cm away from the frame’ scorner. Fix
plate
②
is about 5cm away. (Fig.4)
(4)
Place a fix plate in the center of each side in the following orderE→F→G→H.(Fig.6)
(Fig. 1)
Insert push plate in
Screen material edge
(Fig. 2)
Schematic cross section of the frame
Frame groove
A
C
Fig. 4
B
D
(Fig. 3)
Tip for attaching the last corner (D):
1. Position yourself left of location
①
.
2. Pull the material to the corner of the frame with your hand while your left hand
snaps in the fix plate on location
①
(the third red dot).
3. Then insert and snap in the fix plate on location
②
.
4. Next, move and position yourself on location
③
，
then pull the edge to the
frame and fasten plates on locations
③
and
④
.
5. Finally, fasten the last fix plate on location
⑤
. (Fig.5)
①
②
③
⑤
④
Pull
Fig. 5
Fig.6
E
G
H
F
