3
Frame Assembly and Screen Material Installation
1.
Insert both
Elbow Joints
(
I
) into each
Horizontal Curved Frame
(
P
) and join all four frame parts
together as shown below.
2.
After making sure that all four corners join at right angles (forming a perfect rectangle), fasten the four
angles together by using
M5 screws
(
E
).
3.
Layout the
Screen Material
and
Tension Rods
on a clean and dry surface. Then, gently roll out the
screen material over the back of the fixed frame.
4.
Insert the screen
Tension Rods
through the sleeves according to their corresponding lengths on each edge
of the screen as seen below.
Vertical Upright Fame
Horizontal Curved Frame
Back of the screen material
Minimal gap is normal here
