background image

02092015 EA 

 

www.elitescreens.com/kestrelhome

 

 

NOTE:

 

 

  This equipment has been tested and found to comply with the limit s for a 

Class B

 

digital device pursuant to Part 15 of the FCC Guidelines.   
 

  The products are designed to  provide reasonable protection against harmful 

interference in a residential/commercial installation and end user application and 
may radiate radio frequency energy.  
 

  However, there is no guarantee that interference will not occur in a particular installation. 

If this equipment does cause harmful interference to radio or television reception, which 
can be determined by turning the equipment off and on, the user is encouraged to try to 
correct the interference by one or more of the following measures: 

 

 

1.  The power outlet should be close to the unit and easily accessible. 
2.  Re-orient or relocate the receiving antenna. 
3.  Increase the separation between the equipment and the receiver. 
4.  Connect the equipment into an outlet on a circuit different from that to which the 

receiver is connected. 

5. 

Consult t he dealer or an experienced radio/TV technician f or additional help. 

 

Kestrel Home Standard Accessory 
 
 
 

K e s t r el  

 

 

 

 

 

 

 

 

 

 

 

Optional Accessories 

Available for purchase at www.shop.elitescreens.com or your preferred reseller 

 
 
 
 
 
 
 
 
 

 

 

Qty 2 

AA Batteries 

 

Radio Frequency 

Remote Control 

Part# - 

ZSP-RF-B

 

 

Low Voltage 3-way  

Wall Switch 

Part# - 

ZSP-WB-B

 

 

Wireless 5-12V Trigger 

Part# -ZSP-TR02

 

Содержание Kestrel Home Series

Страница 1: ...heat protection sensor If the screen is consecutively brought up and down between 3 4 minutes the motor will automatically shut off to prevent the motor from sustaining damage through overheating If the automatic shutoff is activated please allow 30 minutes cool down before resuming operation 3 The Kestrel Home Series is equipped with a strong tension cross spring system Please do not attempt any ...

Страница 2: ...y turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures 1 The power outlet should be close to the unit and easily accessible 2 Re orient or relocate the receiving antenna 3 Increase the separation between the equipment and the receiver 4 Connect the equipment into an outlet on a circuit different from that to which the r...

Страница 3: ...n s rise and drop with the projectors power cycle The screen rises when the projector powers up and retracts when the projector powers down To enable this feature connect one end the 5 12V trigger cable to your projector s trigger output port and the other end to the RF remote control see diagram below The trigger feature will not work without if the projector does not have a 5 12V output port If ...

Страница 4: ... side compartment which accepts the 5 12V trigger extended IR eye receiver or the 3 way wall switch box Storing the screen Always store the screen flat horizontally Never store the screen in a vertical position Screen Maintenance 1 Always close the screen when not in use 2 Do not touch the screen surface 3 Keep away from direct sun and high low temperatures 4 For indoor use only 5 Clean with soft ...

Отзывы: