Remote control and 3 & 4 prong wire information
. .
Rev 1.3
This
is the
IR
(Infra-Red)
remote with a
range of 15 Ft.
This is the
RF
(Radio
Frequency)
remote with a
range of 30 Ft.
The 3 prong wire will come from
the outlet and the 4 prong cable
goes directly to the screen. The
directional buttons are located on
the side of the control box.
Control box
4”5/8
1”1/2
Down
Stop
Up
Stop
Down
Up
The
Battery
Size is
23A 12V.
2”7/8
The
outlet 3
prong
cable is
98” 3/8
in
Length.
The 3 and 4 prong wires are needle size
and lock when properly inserted into
the correct connection.
¼
The 4
prong
cable is
98” in
length
.
5/8”
The 4 prong cable will be
connected from the control
to the screen.
The 3 prong cable will
be connected from the
outlet to the control box.
** Please remember to always point to the wall switch receiver when using the IR remote.
The IR remote can also work with a Universal Learning Remote Control usually by
programming the Screen’s IR codes in your Universal Learning Remote.
