Rev.041717-DR
www.elitescreens.com
3
6.
Join the remaining
horizontal long frame (B)
with the frame built in the previous steps as shown below.
7.
Make sure all four corners are properly in place to form a perfect square. Then fasten the four angles with
the
M5x15 Screws (H)
.
Screen Material Installation
1. Lay the
screen material
completely flat with the front facing down on a clean surface in a horizontal position.
The back side of the screen material should be placed upwards.
Note: The back side of the material has the velcro borders all around the edges.
2. Carefully and gently place the assembled frame on top of the screen material as shown below. Make sure to not
allow the angle edge of the frame to come in direct contact with the screen material to avoid puncturing it.
Horizontal Long frame (B)
Four corners join correctly to form a perfect
square. Use the included
screwdriver
to
fasten the
M5x15 screws (H)
into each
corner by aligning the frame screw holes to
the holes in the
elbow joint (A)
.
push
push