Rev.041717-DR
www.elitescreens.com
12
Attention
: Installing the
edge trim
will reduce the viewing size of your screen. See below illustrations for a
comparison of the viewing size of the before and after edge trim installation using the 100” & 120” 16:9 diagonal
models.
100” comparison:
120” comparison:
Installation
Locate your desired installation location with a stud finder (recommended) and mark the drill-hole area of where the
screen is to be installed.
1.
Drill a hole with the proper bit size according to the wood screws included.
2.
Line up the wall brackets with the drilled holes on the installation location and screw them in using a
Phillips screwdriver.
3.
Position the frame screen onto the
wall brackets
(F)
as shown in
below
.
4.
The design of the wall brackets allows the frame to slide over them through its sides. This is an important
feature of the installation design as it allows your screen to be properly centered.
For a local Elite Screens contact or Technical Support, please visit
www.elitescreens.com
Before installing the edge trim
After installing the edge trim
After installing the edge trim
Before installing the edge trim