Rev.060116-D
7
D
H
G
1.
Measure and cut the ceiling installation slot:
The width should not exceed 100mm and not less than the width of the screen’s housing. Measure the
length of your screen to determine the length.
2.
Drill 4 holes in the ceiling that correspond with the attachments on the various casing sizes. The
width should be 120mm. The length of (A5) in the diagram below depicts the distance between the
holes located on each ear end of the screen’s case.
3.
The
M8expanding bolts
(G) mount into thick wood beams, stone or concrete and will support the
screen. Use the
Socket wrench
(D) to attach the
M8x40mm hexagonal screws
. The expanding bolts
should be firmly tightened and tested to make sure that they will hold the weight of the screen.
The ceiling wall
Install screw holes
70
Ceilin
g
Ceiling Truss
Screen installation slot
100
